SMS Deliverability & Filtering

Why business texts get filtered, what carriers watch, how throughput and routing affect delivery, and how to improve your SMS delivery rate.

Key takeaways

  • SMS deliverability is the share of sent messages that actually reach the handset. "Sent" only means a message left your platform; "delivered" means the carrier accepted it.
  • Most undelivered business texts are filtered, not lost. Filtering can happen at your messaging provider, at the aggregator (DCA) and at the carrier.
  • Carriers score three things: who is sending (registration and trust score), what you send (content and links) and how people respond (opt-outs, complaints and replies).
  • Keep opt-outs under 1%, never send to bought or stale lists, drip re-engagement instead of blasting, and avoid public link shorteners like bit.ly.
  • Fewer hops between your provider and the carriers means fewer places to be filtered. Signal House delivers up to 99% of messages over direct connections with carriers and carrier partners.

What is SMS deliverability?

SMS deliverability is the percentage of the texts you send that actually reach your recipients' phones. It's different from your "sent" count. A message is sent when it leaves your messaging provider and the carrier network accepts it, usually in under a quarter of a second. It's delivered when the carrier confirms it reached the handset, typically 2 to 20 seconds later.

A high sent count with a low delivered count almost always means filtering. One caveat: on any given day, roughly 5 to 8% of delivered messages never get a delivery receipt back from the carrier, so a small gap is normal. The life cycle of an A2P text message walks through every step from API call to receipt.

How a business text gets delivered

Every A2P (application-to-person) message passes through a chain:

  1. Your messaging provider receives the API call and queues the message within your campaign's throughput limits.
  2. A Direct Connect Aggregator (DCA) passes it to the carrier. The main US DCAs are Syniverse, Sinch, Infobip and Vibes. See who the DCAs are.
  3. The carrier (AT&T, Verizon, T-Mobile and smaller networks) scores the message and delivers it to the handset, or doesn't.

Each layer can filter, delay or throttle your message, and each extra hop, such as a reseller sitting on top of another provider's API, adds another place to fail and another place you lose visibility. Fewer hops means fewer points of failure and clearer diagnostics.

Why business text messages get filtered

Filtering comes down to trust. Carriers score the sender, the route and the content, and block what looks risky. The most common causes, roughly in order:

  • Unregistered or mis-registered 10DLC. Carriers block unregistered A2P traffic on 10-digit numbers, and a campaign that doesn't match what you actually send gets filtered too. Start with the A2P 10DLC registration guide.
  • Weak or missing consent. Texts to people who never opted in draw complaints, and complaints drive filtering.
  • Prohibited content. SHAFT content (sex, hate, alcohol, firearms, tobacco) and adjacent categories such as CBD, gambling and high-risk lending are filtered aggressively.
  • Risky content patterns. Public link shorteners, links with multiple redirects, ALL CAPS, false urgency ("ACT NOW!!!"), excessive dollar signs and pushy sales language.
  • High opt-outs and complaints. STOP replies, junk reports and angry replies all lower your sender reputation.
  • Volume spikes. Jumping from a few thousand messages to hundreds of thousands overnight looks like a spammer turning on a blast.
  • Content drift. Sending promotions on a campaign registered for customer care or account notifications.

Registration gets you in the door; it doesn't guarantee delivery. Carriers keep scoring your traffic after approval. Read why your text messages get filtered and how to fix it.

Who filters: provider, aggregator and carrier

  • Messaging providers filter for spam, scams and SHAFT content. Keyword filters block any message containing a flagged word, even a business name; algorithmic filters look at the whole message and cause fewer false positives.
  • DCAs run their own filters, often AI-driven, on everything they pass to carriers.
  • Carriers see the most traffic and have the most data, so their filters are the most powerful. T-Mobile is generally the strictest.

Because providers filter differently, the exact same message can deliver noticeably better on one provider than another. See how your provider may be filtering and throttling your messages.

The signals carriers watch

Carriers don't only look for STOP replies. They track a set of signals that together decide whether your traffic looks wanted:

  • Opt-out rate. Under 1% is the gold standard, under 3% is acceptable, and 5% or more is a red flag that leads to throttling or blocking.
  • Negative sentiment. Replies like "leave me alone" or "don't text me again" count against you even though they aren't opt-out keywords. Treat them like opt-outs.
  • Confusion. Replies like "who is this?" or "Jim hasn't had this number in years" tell carriers you're texting a bought or stale list.
  • Scam patterns. Openers like "Hi, is this Diane?" mirror social-engineering scams. Start with your name, your company and why you're texting instead.

How carriers escalate penalties

When the signals go bad, carriers escalate in steps:

  1. Number: a single number is flagged and its delivery rate collapses.
  2. Campaign: if the behavior continues across numbers, every number on the campaign stops working.
  3. Brand: the carriers block the brand's EIN, and that business can no longer register campaigns or send A2P texts.

Some flags expire after days or weeks; persistent problems become permanent. The 3 signals killing your A2P deliverability and understanding carrier patterns go deeper.

Throughput limits and throttling

Some messages that look "undelivered" are actually queued or rejected for exceeding throughput. Carriers set limits per campaign and brand:

  • AT&T: segments per minute, per campaign, from 240 SMS a minute on a standard campaign up to 4,500 with a high vetting score.
  • T-Mobile: segments per day, shared across your whole brand, from 2,000 a day up to 200,000 with a high vetting score.
  • Verizon: doesn't publish its limits.

Additional vetting raises these limits, and re-vetting every 6 to 12 months helps as your company grows. Watch for provider-side throttling too: some providers cap your API at a few messages per second, far below what the carriers allow. Ask what your provider's API limits are, and whether you'll ever be limited below your carrier throughput. See is your messaging provider throttling you? and how to maximize 10DLC throughput.

Carrier differences

  • T-Mobile has the largest share of US subscribers, runs its own provisioning system, enforces the strictest content rules and is sensitive to "segment bursting" (many identical messages at once). New numbers can take up to 24 hours to provision there.
  • AT&T is consistent and predictable, with throughput measured per minute.
  • Verizon shares the least about its systems, and its flags often show up after the other carriers'.

Because filtering is usually carrier-specific, always break your delivery rate down by carrier. See investigating the carriers and why T-Mobile works differently.

How to improve SMS deliverability

  1. Register correctly. Match your campaign use case, description and sample messages to what you actually send. Use a mixed campaign if you send more than one type of message.
  2. Get clear consent. Only text people who opted in, and keep the records. Never use bought, rented or scraped lists.
  3. Identify yourself. Put your registered brand name in the first message to every contact.
  4. Clean up content. Use your own domain or a registered short link with a single redirect, skip ALL CAPS and false urgency, and split finance-heavy or promotional copy into shorter messages.
  5. Warm new numbers. Start with conversational messages to your most engaged contacts and ramp volume gradually. See how to warm a 10DLC number.
  6. Drip re-engagement. Mix old contacts into your daily traffic in small batches instead of blasting a dormant list, so your opt-out rate stays stable.
  7. Clean your list. Remove out-of-service and unengaged numbers. Recycled numbers can carry a previous owner's bad reputation.
  8. Watch your metrics. Track delivery by carrier, opt-out rate and replies daily, and act on a spike the same day.
  9. Choose your route carefully. Ask any provider how many hops sit between them and the carriers, what kind of content filtering they use, and whether they limit throughput below carrier limits.

Also see avoiding carrier flags, the 5 biggest A2P messaging mistakes and, from September to November, how election season affects every sender.

How to tell if your messages are being filtered

  • Compare delivered to sent, using delivery receipts rather than your send count.
  • Break delivery down by carrier. Fine on AT&T and poor on T-Mobile is a strong filtering signal.
  • Read error codes. Codes such as Twilio's 30007 ("message filtered") mean the carrier blocked the message for content or reputation.
  • Watch engagement. If deliveries look normal but replies and clicks fall off a cliff, messages may be landing in spam folders.
  • A/B test providers. Send the same message through two providers and compare delivery.

Deliverability with Signal House

Signal House delivers up to 99% of messages. We route over direct connections with carriers and carrier partners with carrier-aware queuing, limit you only by what the carriers allow for your campaign, and show every message's journey (queued, sent, delivered or failed, with the reason) in real time. Our team reviews your registration and use case up front and works with you when delivery dips. Start free or get a demo and we'll look at your current delivery by carrier.

Go deeper: articles in this guide

Frequently asked questions

What is a good SMS delivery rate?

For registered business traffic, aim for the high 90s. Signal House delivers up to 99% of messages. A rate that's much lower, or much lower on one carrier, usually means filtering.

Why do my text messages say sent but not delivered?

Sent means the message left your provider and the carrier accepted it. If it never shows as delivered, the carrier most likely filtered it, or the number is a landline or out of service. Roughly 5 to 8% of delivered messages also never return a receipt.

How do I avoid carrier spam filters for SMS?

Register your 10DLC brand and campaign correctly, text only people who opted in, include your brand name, avoid public link shorteners and spammy phrasing, keep opt-outs under 1%, and ramp volume gradually.

What is carrier filtering?

Automated checks run by mobile carriers (and the aggregators that connect to them) that score every business message for spam risk and block those that look unsolicited or unsafe.

What does Twilio error 30007 mean?

Error 30007 means the carrier filtered the message, usually because of its content, a link, or the sender's reputation. The fixes are the same as for any filtering: registration, consent, clean content and healthy opt-out rates.

Does 10DLC registration improve deliverability?

Yes. Carriers block unregistered A2P traffic on 10-digit numbers, so registration is required. But it's not enough on its own: carriers keep scoring your content, opt-outs and complaints after approval.

What opt-out rate is too high for SMS?

Under 1% is ideal and under 3% is acceptable. At 5% or more, carriers start throttling or blocking traffic.

Do link shorteners hurt SMS deliverability?

Public shorteners like bit.ly do, because spammers use the same domains. Use your own domain or a registered short link with a single redirect.

Ready to send through direct carrier connections? See it, or start free.

Get a demo Start free